Setting - Sanyo PLC-SW35 Owner's Manual

Setting

Setting
This projector has Setting menu that allows you to set up the
other various functions described as follows;
1 Press the MENU button to display the On-Screen Menu.
Press the Point
the Setting Menu icon.
2 Press the Point
the item that you want to set and then press the SELECT
button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Keystone
This function corrects distortion of a projected image. Select
either Store or Reset with the Point
the Select button. The keystone dialog box appears. Adjust
keystone with the Point
Store . . . . stores the keystone adjustment even if the AC
power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power
cord is disconnected.
Blue back
When this function is "On," the projector produces a blue image
while input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On . . . . . . . shows all the On-Screen Displays.
Off . . . . . . . does not show On-Screen Displays except;
●
On-Screen Menu
●
"Power off?" message
●
P-Timer
●
"No signal" message
●
"Wait a moment!" message
38
button to move the red frame pointer to
7 8
d d button to move the red frame pointer to
7 8 button, and then press
e e d d button.
Setting Menu (Language)
Set the red frame
pointer to the item
and press the
SELECT button.
When pressing the SELECT
button at Language, the
Language Menu appears.
Setting Menu icon