Operating The Projector - Sony QUALINA 004 Owner's Manual

Operating the projector

from a computer (continued)
Setting the date and time
Click "Date and Time."
This setting is required for the Regular
Report function.
Time Zone
Select the region in which you are using the
projector.
Date/Time
Set the date and time.
Time Server
Enter the address of the time server when
the time is set by a time server.
Network settings
Click "Network."
Internet Protocol (TCP/IP)
Normally, set "Obtain an IP address
automatically (DHCP)." If you select "Specify
an IP address," set the necessary items.
70
Setting passwords for "Administrator" and
"User"
Click "Password." You can set passwords for
each "Administrator" and "User."
The name of the "Administrator" account is
preset to "root" at the factory. It cannot be
changed.
Settings for the Mail Report function
Click "Mail Report."
You can do the following with the Mail Report
function:
• Periodically report the installation status of
the projector, the owner information, etc.
You can specify the transmission days and
times of e-mail messages (Regular Report).
• Immediately report if any error occurs with
the projector (Error Report).
• Send warning e-mail messages when a
preset time for use of the projector lamp
has been reached (Lamp Reminder).
• Send warning e-mail messages when a
preset time for maintenance of the
projector has been reached (Maintenance
Reminder).
Report Timing field
Regular Report
A report on the present status of the
projector, installation status, etc. of the
projector is periodically sent by e-mail.
Set the timing for sending the e-mail
messages as follows:
At:
Specify the time when e-mail is to be
sent. Select the hour from the
drop-down list.
Every Week on Days:
Select this check box to send e-mail on
the selected days every week.
Mon/Tue/Wed/Thu/Fri/Sat/Sun:
Specify the days of the week when
e-mail is to be sent. You can check two
or more days.
Every Month on Day:
Select this check box and select the day
from the drop down list to send e-mail
on a pre-defined day every month.The
Regular Report contains the product
information, owner information, usage
information (time) for the projector, lamp
mode, memos, etc.
Maintenance Report
Lamp Reminder:
Select this check box and enter the limit
for the number of hours the projector
lamp is to be used in the text box. This
information will be used to send e-mail
informing you that replacement is
required for the projector lamp when the
preset time has been reached. You can
specify a time between 1 and 9999
hours.
Maintenance Reminder:
Select this check box and enter the
hours of use before maintenance is
required for the projector in the text box.
You can specify a time between 1 and
99999 hours.
The elapsed time is displayed in the
Elapsed Hours text box. Selecting the
RESET check box and clicking "Apply"
will reset the elapsed time to zero.
continued
71