Identification Of Parts - Sony QUALINA 004 Owner's Manual

Identification of parts

Front/Top
1 2
Rear/Bottom
7
8
18
Front/Top
3
Front remote detector (SIRCS receiver)
1
Lens/Lens protector
2
Ventilation holes
3
Note on ventilation holes (intake/exhaust)
• Do not place anything near the ventilation holes as
this may cause internal heat build-up.
Placing your hand near the ventilation holes may
4
cause burn injuries.
Information panel display
4
Displays the status of the projector.
5 Control panel
5
A control panel is located in the unit. You
can open the control panel by pressing the
6
button beside it.
For details, see "Control panel" on page 20.
9
Pure xenon lamp
6
q;
qa
qs
qd
Rear/Bottom
Rear remote detector (SIRCS receiver)
7
Ventilation holes (exhaust)
8
Ventilation holes (intake)/Air filter
9
Adjusters
0
When a picture is projected on an exterior
screen, adjust the picture using these
adjusters. The picture moves up as you turn
them clockwise and moves down as you turn
them counterclockwise.
Connector panel (Right side)
qa
For details, see "Connector panel" on page
66.
Connector panel (Left side)
qs
For details, see "Connector panel" on page
64.
Button
AC IN socket
qd
Connect the AC power cord. To avoid
Control panel
unplugging the AC power cord accidentally,
attach the supplied plug holder.
Plug holder
Notes
• Make sure that the AC power cord is connected
properly.
• Attach the plug holder to avoid unplugging the AC
power cord accidentally. Also, the plug holder
prevents the AC power cord from becoming clogged
with dust.
• For safety, use the AC power cord supplied with the
unit.
continued
19