Information Panel Display; Imagedirector - Sony QUALINA 004 Owner's Manual

Projector
Table of Contents

Advertisement

Troubleshooting (continued)

Information panel display

Message
Cause/Remedy
•The top cover or air filter is detached. Contact QUALIA Customer
COVER FAILURE
Service.
•The lamp has reached the end of its life. Contact QUALIA Customer
Service.
LAMP FAILURE
•Check to see whether or not the projector is being used at high
altitudes. Contact QUALIA Customer Service.
•The lamp temperature is high. Contact QUALIA Customer Service.
FAN FAILURE
•The fan is broken. Contact QUALIA Customer Service.
•The internal temperature is too high. Check to see if something is
blocking the ventilation holes. Check to see if the air filter is clogged
with dust.
•Check to see whether or not the projector is being used at high
TEMP FAILURE
altitudes.
•Check to see whether or not the projector is tilted at an angle of more
than 20 degrees.
If the message persists, contact QUALIA Customer Service.
•The electrical system has broken down. Contact QUALIA Customer
POWER SYSTEM FAILURE
Service.
IRIS FAILURE
•The optical iris is damaged. Contact QUALIA Customer Service.
LENS PROTECTOR
•The lens protector is damaged. Contact QUALIA Customer Service.
FAILURE
Please check Input-B Signal
•Invalid input setting. Set "Input-B Signal Sel." according to the input
Sel.
signal (see page 46).
Please check DVI Signal
•Invalid input setting. Set "DVI Signal Sel." according to the input signal
Sel.
(see page 46).
•This input signal cannot be projected as the frequency is out of the
Frequency is out of range!
acceptable range of the projector. Input a signal that is within the
frequency range.
80
Information panel display (continued)
Message
Cause/Remedy
High temp! Switch to high
•When using the projector at an altitude of 1,500 m or higher, press the
altitude mode on?
M button.
Lamp/Filter life remains less
•The remaining life of the lamp and the air filter is 50 hours. Contact
than 50H.
QUALIA Customer Service.
Lamp/Filter life remains less
•The remaining life of the lamp and the air filter is 15 hours. Contact
than 15H.
QUALIA Customer Service.
•The lamp and the air filter life has reached the end. The lamp is
End of Lamp/Filter life.
automatically turned off in about a minute. Contact QUALIA Customer
Lamp off in 1min.
Service.
High temp! Lamp off in
•The internal temperature is too high. The lamp is automatically turned
1min.
off in about a minute. Contact QUALIA Customer Service.
•The optical iris unit does not work. Contact QUALIA Customer
Iris unit doesn't work.
Service.

ImageDirector

Refer to the online help of the ImageDirector
software when any messages are displayed
on the screen while you are using the
ImageDirector software.
For details on connected equipment such as
a computer, etc., refer to the operating
instructions supplied with that equipment.
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents