Input Setting Menu; Adjust Signal; Auto Wide Setting - Sony QUALINA 004 Owner's Manual

INPUT SETTING menu

ADJUST SIGNAL

The INPUT SETTING menu is used to adjust
the input signal.
Items that cannot be adjusted for a particular
input signal do not appear in the menu.
Example: When a computer signal is input.
����� ������� �������
������ �������
��� ������ ��
� ����� ����
������ �� ��� �� ��
���� ���� ����� �����
����� ����
36
Dot Phase
Adjusts the dot phase of the panel and the
computer signal input from the INPUT B
connector.
Adjust the picture to the point where it looks
clearest.
H Size
Adjusts the horizontal size of the picture
input from the INPUT A/B connector.
The higher the setting, the larger the
horizontal size of the picture. The lower the
setting, the smaller the horizontal size of the
picture. Adjust the setting according to the
number of dots of the input signal. For
details on a suitable value for the preset
signals, see page 43.
Shift
Adjusts the position of the picture input from
the INPUT A/B connectors.
Use the < or , button for "H (the
horizontal position of the picture)" and the M
or m button for "V (the vertical position of the
picture)."
As the setting for "H" increases, the picture
moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for "V" increases, the picture
moves up, and as the setting decreases, the
picture moves down.

AUTO WIDE SETTING

When set to "2," the most appropriate screen
projection mode is selected automatically
according to the signal being input and
displays the picture to fill a 16:9 screen.
Example: When a video signal is input.
�����
����� �������
���� ���� ����������
���� ����� ���� ����
���� ���� ����� �����
����� ����
����� ������� �����
���� ���� �������
���� ����� ���
��� �������� �
�
���� ���� ����� �����
����� ����
Auto Wide
Off:
Select to display any picture in the currently
selected wide screen projection mode.
1:
Select to display a picture containing an
aspect ratio signal* with the original aspect
ratio.
2:
Select to display a picture with the most
appropriate screen projection mode
regardless of the aspect ratio signal.
4:3 Default
Select "Wide Zoom" or "Normal" to display a
picture in either mode when a normal 4:3
aspect ratio picture is input and the "Auto
Wide" is set to "2."
* An aspect ratio signal lets a TV, etc.
reproduce a picture with its original ratio.
This projector can handle images such as
video camera pictures, DVD movies, etc.
with an aspect ratio signal included in the
data (e.g. ID-1, S2).
continued
37