To enable the new password, enter the new password, then click [Apply].
Note
If you forget your password, contact qualified Sony personnel.
Your password will be reconfigured once your approval has been obtained.
Confirming the Projector State
Clicking the [Information] page toggle tab and opening the [Information] page allows you to confirm the projector's
current state.
Operating the Projector
Clicking the [Control] page toggle tab and opening the [Control] page allows you to operate the projector.
The button functions are the same as those of the keys on the Remote Commander.
5-014-280-13(1) Copyright 2020 Sony Corporation
95