Table of Contents
Advertisement
Operating the Projector from
a Computer
You can control the projector from the
computer on the Control page.
Operation area
The functions of the buttons shown in the
operation area are the same as the keys on
the remote commander.
Using the e-mail report
Function
Set the e-mail report function on the Setup
page.
Entered values will not be applied unless
you click on [Apply].
1
Click on [Owner information] to enter
the owner information recorded in the
e-mail report.
Owner information button
2
Set the timing of the e-mail report.
Click on [Mail Report] to open the Mail
Report page.
38
Using Network Features
Lamp Reminder (Lamp1): Set the
timing of the email report for lamp
replacement. To reset Lamp
Reminder, execute "Lamp Timer
Reset" on the projector (page 29).
Maintenance Reminder: Set the timing
of the email report for maintenance. To
reset Maintenance Reminder, check
the RESET check box and then click
on [Apply].
Mail Report button
3
Enter the outgoing e-mail address in
the Email Address box then check the
Report Timing check box of the e-mail
report to be sent.
4
Set the mail account for sending e-
mail reports.
Mail Address: Enter the e-mail address.
Outgoing Mail Server (SMTP): Enter
the address of outgoing mail server
(SMTP).
Required Authentication: Check this
check box if authentication is required
1
for sending e-mail.
2
3
4
6
5
Advertisement
Table of Contents
