Set Setting Menu - Sony QUALINA 004 Owner's Manual

SET SETTING menu

The SET SETTING menu is used for changing
the settings of the projector.
�������
��� �������
������� ������ ����� ���������
��� ������ ����� ����� ���
����� ������� ����
������ ������� ���
����� ������ ����
����� ������� ���
������������� ��
����������� ������ ��
���� ���� �����
����� ����
46
INPUT-B Signal Sel.
Select "Computer,""Component," or "Video
GBR," according to the signal input via the
INPUT B connectors.
DVI Signal Sel.
Select "Computer" or "Video GBR," according
to the signal input via the DVI-D connector.
Notes
• The INPUT A connectors are only for component
signal input.
• If the setting of "INPUT-B Signal Sel." is not correct,
the color of the picture may be distorted, or "Please
check Input-B Signal Sel." appears on the screen
and the picture is not displayed.
• If the setting of "DVI Signal Sel." is not correct, the
color of the picture may be distorted, or "Please
check DVI Signal Sel." appears on the screen and
the picture is not displayed.
• Set a progressive component signals (e.g. DVD) to
"Component" and 15k RGB signals (e.g. game
machines) to "Video GBR."
Signals that can be input according to the INPUT-B setting
Signal
Computer
15k RGB
Component
Progressive component signal,
e.g. DVD
DTV
PC a
a
: can be input : cannot be input
Color System
Selects the color system of the input signal.
Auto:
One of the following signals is selected
automatically:
"NTSC," "PAL," "SECAM," "NTSC ,"
4.43
"PAL-M," "PAL-N."
NTSC , PAL, SECAM, NTSC , PAL-M,
3.58 4.43
PAL-N:
Set the color system to a selected input
signal.
Normally, set to "Auto." If the picture is
distorted or colorless, select the color
system appropriate for the input signal.
Source Direct
When set to "On," the projector reproduces
a faithful picture from the following HD (High
Definition) input signals: input signal preset
memory No. 5, 45, 49.
Color Space
Selects the range of color reproduction from
"Normal" or "Wide."
Setting of INPUT-B
Component Video GBR
a
a
a
a a
Power Saving
When set to "On," the projector goes into
power saving mode if no signal is input for
10 minutes. This mode is cancelled when a
signal is input or any button is pressed.
Illumination
When set to "On," the projector turns on the
illumination on the top panel of the projector.
It turns off when this item is set to "Off."
Information Panel
When set to "On," information appears on
the information panel display. This
information disappears when this item is set
to "Off."
47