[Tv Aspect]/[Version Disp.]/ [Format]; [Language]/[Demo Mode] - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Using the [SETUP] menu
For details about the setting procedure in the [SETUP] menu. (→32)
Item
[TV ASPECT]
• Operates when AV cable is connected.
Change the aspect ratio
when connected to a
TV, etc. (Playback Mode
only).
Current version is displayed.
[VERSION DISP.]
Check the version of the
camera firmware.
[YES]/[NO]
[FORMAT]
• This requires a sufficiently charged battery (→23) or AC
Use when [BUILT-IN
adaptor (optional). When formatting the built-in memory,
MEMORY ERROR]
remove the cards.
or [MEMORY CARD
(Only inserted card will be formatted if present; built-in
ERROR] appears, or
memory will be formatted if no card is inserted.)
when formatting the built-
• Always format cards with this camera.
in memory or card.
• All protected pictures and other picture data will be
deleted. (→93)
When a card/built-in
• Do not turn off power or perform other operations during
memory is formatted,
formatting.
the data cannot be
• Formatting the built-in memory may take several
restored. Check the
minutes.
content of the card/
• Consult the dealer or your nearest Service Centre if
built-in memory
format cannot be successfully completed.
carefully before
formatting.
40
VQT2X62
(Continued)
Settings, Notes
/
For details about the setting procedure in the [SETUP] menu. (→32)
Item
Set the language displayed on the screen.
[LANGUAGE]
Change display
language.
[STABILIZER DEMO.]: (Only during recording)
[DEMO MODE]
Indicates the extent of jitter detected by the camera
View demonstration of
(Estimate)
functions.
Large ← Small → Large
• When the demo screen is displayed, press [MENU/SET]
to switch the Optical Image Stabilizer between on and
off.
• Cannot be displayed in Playback Mode.
• To stop→ Press [DISPLAY] button.
• Recording and zoom cannot be performed during demo.
[AUTO DEMO]: View introductory Slide Show
[OFF]/[ON]
• To close → Press [MENU/SET]
• If the camera is left switched on while connected to the
AC adaptor (optional) and with no card inserted, the
demo will automatically begin whenever no operations
are performed for approx. 2 minutes.
• [AUTO DEMO] cannot be displayed on external devices
such as TVs.
Settings, Notes
Extent of jitter
Extent of jitter after stabilization
41
VQT2X62