[Rec Quality]; Useful Features For Travel - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Taking motion pictures
[MOTION PICTURE] Mode
Recording Mode:
When recording motion picture, use a card rated with an SD speed class ∗
∗
1 SD speed class refers to a specification for sustained write speeds.
Display [REC] menu
Select [REC QUALITY]
Picture Quality Picture Size
[HD] 1280 × 720 pixels
[WVGA] 848 × 480 pixels
[VGA] 640 × 480 pixels
[QVGA] ∗
320 × 240 pixels
2
∗
[QVGA] is fixed when recording to the built-in memory.
2
●
Depending on the motion picture recording environment, static electricity or
electromagnetic waves may cause the screen to go black momentarily or noise to be
recorded.
●
Before recording motion pictures, make sure the battery is adequately charged, or use
an AC adaptor (optional).
●
When recording motion pictures using an AC adaptor, if you unplug the AC adaptor or a
power outage occurs, power to the camera is cut, and the motion picture in progress is
no longer recorded.
●
If you attempt to play motion pictures recorded with the camera on other devices,
playback may not be possible, or the picture or sound quality may be poor.
Additionally, incorrect recording information may be indicated.
●
Motion pictures recorded with the camera cannot be played on Panasonic LUMIX digital
cameras sold before July 2008. (However, motion pictures recorded with LUMIX digital
cameras sold before this date can be played on this camera.)
70
VQT2X62
(Continued)

[REC QUALITY]

1 of 'Class 6' or higher.
Select the desired picture
quality
Close menu
Picture Aspect
No. of Frames
30 fps

Useful features for travel

Recording Mode:
[TRAVEL DATE] (Record travel date and destination)
Record information as to what day and where pictures were taken by setting departure
dates and destinations.
Set-up: • Clock must be set in advance (→30).
• Press [MENU/SET] →
Select [TRAVEL SETUP]
Select [SET]
Ratio
Set departure date
16:9
4:3
Press ▲▼◄► to set the return
date, and then press [MENU/SET]
To continue without setting the return date,
press [MENU/SET] without entering anything.
●
The number of days elapsed is displayed for approx. 5 sec. when switching from playback
to Recording Mode or when power is turned on. (
●
When destination is set in [WORLD TIME] (→72), days elapsed are calculated based on
local destination time.
●
If settings are made before departure date, number of days to departure are displayed
in orange with a minus sign (but not recorded).
●
When [TRAVEL DATE] is displayed in white with a minus sign, the [HOME] date is one
day in advance of the [DESTINATION] date (this is recorded).
●
To print travel date or destination → Use [TEXT STAMP], or print using supplied
CD-ROM 'PHOTOfunSTUDIO'.
●
[TRAVEL SETUP] can be recorded during motion picture recording, but [LOCATION] cannot.
∗
∗ Recording only. (Cannot set.)
[SETUP] menu → Select [TRAVEL DATE]
Select [LOCATION]
Select [SET]
Enter destination
• 'Entering Text' (→80)
• Press [MENU/SET] twice after inputting
text to complete.
■
Clearing the information
After the return date, the information
is automatically cleared. To clear the
information before this date, select [OFF]
in step , and then press [MENU/SET]
3 times to close the menu.
displayed at bottom-right of screen)
71
VQT2X62