Picture Save Destination (Cards And Built-In Memory); Remaining Battery And Memory Capacity - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Inserting and removing the card (optional)/
the battery
(Continued)

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory
■
Built-in memory (approx. 40 MB)
●
Pictures may be copied between cards and the built-in memory (→94).
●
The access time for the built-in memory may be longer than the access time for a card.
●
[QVGA] in [REC QUALITY] can only be available to record motion pictures in the built-
in memory.
■
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)
Type of Card Capacity
SD Memory Cards 8 MB – 2 GB
SDHC Memory Cards 4 GB – 32 GB
SDXC Memory Cards 48 GB, 64 GB
●
Please reformat the card with this camera if it has already been
formatted with a computer or another device. (→40)
●
If the write-protect switch is set to 'LOCK', the card cannot be used to
record or delete pictures, and it cannot be formatted.
●
It is recommended that you copy important pictures to your computer
(as electromagnetic waves, static electricity, or faults may cause data to
be damaged).
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
28
VQT2X62
if not.
Notes
• Can be used with devices compatible with the
respective formats.
• Before using SDXC Memory Cards, check that
your computer and other devices support this type
of card.
http://panasonic.net/avc/sdcard/information/SDXC.html
• Cards in capacities not listed at left are not
supported.
Switch (LOCK)

Remaining battery and memory capacity

Remaining battery (only when using battery)
If the battery mark flashes red, recharge or replace battery. (→23)
Displayed when no card is inserted (pictures will be saved to built-in
memory)
Pictures remaining (→118)
When in operation
(Card) or (Built-in memory) are illuminated red.
This means that an operation is in progress, such as the recording, reading, deleting,
or formatting of pictures. Do not turn off the power or remove the battery, card, or AC
adaptor (optional) (this may cause damage to or loss of data).
Do not subject the camera to vibrations, impact, or static electricity. Should any of these
cause camera operation to be terminated, attempt to perform the operation again.
(flashes red)
29
VQT2X62