Viera Link / Version Disp/ Format/ Language; Demo Mode - Panasonic LUMIX DMC-TZ6 Operating Instructions Manual

Using SETUP menu
Item
OFF : Operations must be performed via the camera's
VIERA Link
Enable automatic linking
ON: Operations may be performed via the remote control
with other VIERA Link-
compatible devices,
and operability with a
VIERA remote control
when connecting via an
• Works when connected via an HDMI mini cable
HDMI mini cable (sold
(sold separately).
separately) (P.107).
VERSION DISP.
Check the version of the
camera firmware.
YES/NO
FORMAT
Use when 'BUILT-IN
• This requires a sufficiently charged battery (P.11) or AC
MEMORY ERROR'
adaptor (optional).
or 'MEMORY CARD
(Only inserted card will be formatted if present; built-in
ERROR' appears, or
memory will be formatted if no card is inserted.)
when formatting the built-
• Always format cards with this camera.
in memory or card.
• All picture data including protected pictures will be
deleted. (P.95)
When a card/built-in
• Do not turn off power or perform other operations during
memory is formatted,
formatting.
the data cannot be
• Consult your nearest Service Centre if format cannot be
restored. Check the
successfully completed.
content of the card/
• Formatting the built-in memory may take several minutes.
built-in memory
carefully before
formatting.
Set the language displayed on the screen.
LANGUAGE
Change display
language.
24
The 'VIERA Link' menu item is not available in the DMC-TZ6/DMC-ZS1.
VQT2C11
(Continued)
Settings, notes
own buttons.
of the VIERA Link-compatible device.
(Not all operations will be available.) Operability of
the camera's own buttons will be limited.
Current version is
displayed.
See P.16 for the setting procedure in the SETUP menu.
Item
JITTER, SUBJ. MOVE DEMO.: (Only during recording)

DEMO MODE

Extent of jitter and of subject movement are shown on
View demonstration of
graph. (Estimate)
functions.
Large ← Small → Large
• When the REC/PLAY switch is
is displayed that asks the user to switch to
• To stop→ Press display button (P.10).
• Recording and zoom cannot be performed during demo.
• Use the movement detection demo with objects with
contrasting colouring.
AUTO DEMO : View introductory slideshow
OFF/ON
• To close → Press 'MENU/SET'
• If the camera is left switched on while connected to the
AC adapter (sold separately) and with no card inserted,
the demo will automatically begin whenever no operations
are performed for approx. 2 minutes.
Settings, notes
Jitter
Movement detection
, a guidance message
.
25
VQT2C11