Setting The Clock - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Setting the Clock

30
VQT2X62
Press the Power button
The power is turned on.
If the language select screen is not displayed,
proceed to step .
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
[PRECAUTIONS] is displayed.
Press ◄ to select [YES], and then
press [MENU/SET]
Be sure to check the information in
[PRECAUTIONS], to ensure that the
waterproof performance is maintained.
• When [NO] is selected, [PLEASE SET THE
CLOCK] is displayed. (When the power is
turned on by holding the Playback button,
the clock setting screen is not displayed.)
Press ◄► to check the
waterproof precautions, and at the
final screen (11/11), press [MENU/
SET]
The [PLEASE SET THE CLOCK] message
appears.
Press [MENU/SET]
The Clock is not set when the camera is shipped.
Press ◄► to select the items (year, month, day, hour, minute,
display order or time display format), and press ▲▼ to set
Select the
setting
item
Change
the values
Select the display order for the day, month, and year
and
([M/D/Y], [D/M/Y], or [Y/M/D]).
settings
• To cancel → Press .
• When set to [AM/PM], 0:00 midnight is AM 12:00, and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press .
• Turn on power again and check time display.
(Time and date can be displayed by pressing [DISPLAY] several times.)
To change time setting
Select [CLOCK SET] from [REC] or [SETUP] menu (→36), perform
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours
beforehand.
■
To set local time at travel destination
[WORLD TIME] (→72)
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures at a digital photo centre or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
Select either [24HRS] or [AM/
PM] for the time display format.
and .
VQT2X62
31