Printing - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Using with your PC
You can save pictures to use on your computer by dragging and dropping folders and
files into separate folders on your computer.
■
Folder and file names on computer
●
Windows
Drives are displayed
in 'My Computer' or
'Computer' folder.
●
Macintosh
Drives are displayed on
the desktop.
(Displayed as 'LUMIX',
'NO_NAME', or
'Untitled'.)
∗ New folders are created in the following cases:
• When pictures are added to folders containing files numbered 999.
• When using cards already containing the same folder number (for example, pictures
taken with other cameras, etc.)
• File may not be able to be played back on camera after changing file name.
■
When using Windows XP, Windows Vista, Windows 7, or Mac OS X
The camera can be connected to your computer even if [USB MODE] is set to
[PictBridge (PTP)].
• Only picture output can be performed from the camera. (Picture deletion can also be
performed with Windows Vista and Windows 7.)
• It may not be possible to import if there are 1000 or more pictures on the card.
■
Playing motion pictures on your computer
Use the 'QuickTime' software on the supplied CD-ROM.
• Installed as standard on Macintosh
Save motion pictures to your computer before viewing.
●
Do not use any other USB connection cables except the one supplied.
●
Turn off power before inserting or removing memory cards.
●
When the battery begins to run out during communication, warning beep sounds.
Cancel communication via your computer immediately (recharge the battery before
reconnecting).
●
Setting the [USB MODE] to [PC] removes the need to make the setting each time the
camera is connected to the computer.
●
For more details, consult your computer operating manual.
96
VQT2X62
(Continued)
DCIM (Still pictures/motion pictures)
100_PANA (Up to 999 pictures/folder)
P1000001.JPG
:
JPG:
P1000999.JPG
Still pictures
101_PANA
MOV:
: ∗
Motion pictures
999_PANA
MISC (DPOF files, Favourite)

Printing

You can connect directly to a PictBridge-
compatible printer for printing.
Getting Ready:
• Use a fully charged battery or connect an AC
adaptor (optional).
• When printing pictures from the built-in
memory, remove any memory cards.
• Adjust the print quality or other settings on
your printer, as needed.
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
• Do not disconnect
the USB connection
cable when the cable
disconnection icon
is displayed (may not
be displayed with some
printers).
Hold here
(Push until it is fully
inserted.)
USB connection cable
(always use cable
supplied)
If using AC adaptor, turn off the camera before plugging
in or removing.
■
To cancel print
Press [MENU/SET]
Turn on power of camera
and printer
Connect camera to printer
• Please make sure you use the
supplied USB connection cable. Use
of cables other than the supplied
USB connection cable may cause
malfunction.
Select [PictBridge (PTP)]
on the camera
When [CONNECTING TO PC...] is
displayed, cancel the connection and
set [USB MODE] to either [SELECT
ON CONNECTION] or
[PictBridge (PTP)].
Press ◄► to select a
picture to print, and then
press [MENU/SET]
Select [PRINT START]
(→100
(Print settings ))
97
VQT2X62