[Print Set]; [Protect] - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Using the [PLAYBACK] menu
Playback Mode:
Picture/picture no./date printing settings can be made for when printing with DPOF print-
compatible shops or printers. (Ask at shop to check compatibility)
Set-up: Press [MENU/SET]→
Select [SINGLE] or [MULTI]
Select picture
●
[SINGLE]
Set number of pictures
(repeat steps and when using [MULTI] (up to 999 pictures))
●
[SINGLE]
Date print
set
No. to print
• Date print setting/release → Press [DISPLAY] button.
• After confirmation, press
■
To clear all
Select [CANCEL] in step and select [YES].
●
When using PictBridge-compatible printers, check settings on actual printer as these may take
priority over camera settings.
●
To print from built-in memory at a shop, first copy pictures to card (→94) before making settings.
●
DPOF print settings may not be made to non-DCF (→50) files.
●
Some DPOF information set by other equipment cannot be used. In such cases, delete all of the
DPOF information and then set it again with this camera.
●
Date printing settings cannot be made for pictures with a [TEXT STAMP] applied. These settings will
also be cancelled if a [TEXT STAMP] is applied later.
92
VQT2X62
(Continued)

[PRINT SET]

[PLAYBACK] menu → Select [PRINT SET]
●
[MULTI]
●
[MULTI]
Date print set
No. to print
to return to the menu screen.
For details about the setting procedure in the [PLAYBACK] menu (→32)
Set protection to disable picture deletion. Prevents deletion of important pictures.
Set-up: Press [MENU/SET]→ [PLAYBACK] menu → Select [PROTECT]
Select [SINGLE] or [MULTI]
Select picture and make setting
●
[SINGLE]
Picture protected
■
To clear all
Select [CANCEL] in step and select [YES].
■
To cancel while releasing all
Press [MENU/SET].
●
May not be effective when using other devices.
●
Formatting will cause even protected files to be deleted.
●
If the write-protect switch is set to 'LOCK,' pictures cannot be deleted even if they are
not protected with the camera setting.

[PROTECT]

●
[MULTI]
• To cancel → Press
[MENU/SET] again.
• After confirmation,
press
the menu screen.
Picture protected
VQT2X62
to return to
93