[Video Out]/ [Tv Aspect] [Version Disp.]/ [Format] - Panasonic DMCFP1 - DIGITAL STILL CAMERA Operating Instructions Manual

Using [SETUP] menu
For details about the setting procedure in the [SETUP] menu. (→14)
Item
[RESET REC. SETTINGS?]
[RESET]
[YES]/[NO]
Reset to the default
settings.
[RESET SETUP PARAMETERS?]
[YES]/[NO]
• Resetting the setup parameters will also reset the
following.
- Age in years/months and names in Scene Modes
[BABY] and [PET]
- [TRAVEL DATE]
- [WORLD TIME]
- [FAVORITE] in [PLAYBACK] menu (set to [OFF])
- [ROTATE DISP.] (set to [ON])
• Folder numbers and clock settings will not be reset.
• Camera movement may be audible as the lens function
is reset. This is not a fault.
[SELECT ON CONNECTION]:
[USB MODE]
Select [PC] or [PictBridge (PTP)] each time you connect to
Select communication
a computer or PictBridge-compatible printer
method for when
[PictBridge (PTP)]: Select when connecting to a
connecting camera to a
computer or printer with
USB connection cable.
[PC]: Select when connecting to a computer
20
VQT2M98
(Continued)
Settings, notes
PictBridge-compatible printer
For details about the setting procedure in the [SETUP] menu. (→14)
Item
[NTSC]/[PAL]
[VIDEO OUT] ∗
• Operates when AV cable is connected.
Change the video output
format when connected
to a TV, etc. (Playback
Mode only).
[TV ASPECT]
/
Change the aspect ratio • Operates when AV cable is connected.
when connected to a
TV, etc. (Playback Mode
only).
Current version is displayed.
[VERSION DISP.]
Check the version of the
camera firmware.
[YES]/[NO]
[FORMAT]
• This requires a sufficiently charged battery (→8) or AC
Use when [BUILT-IN
adaptor (optional). When formatting the built-in memory,
MEMORY ERROR]
remove any cards.
or [MEMORY CARD
(Only inserted card will be formatted if present; built-in
ERROR] appears, or
memory will be formatted if no card is inserted.)
when formatting the built-
• Always format cards with this camera.
in memory or card.
• All picture data including protected pictures will be
deleted. (→72)
When a card/built-in
• Do not turn off power or perform other operations during
memory is formatted,
formatting.
the data cannot be
• Formatting the built-in memory may take several
restored. Check the
minutes.
content of the card/
• Consult your nearest Service Center if format cannot be
built-in memory
successfully completed.
carefully before
formatting.
∗ PAL video out is not available on the version DMC-FP2P/DMC-FP1P sold in the U.S.
and the version DMC-FP2PC/DMC-FP1PC sold in Canada.
Settings, notes
21
VQT2M98