[Focus Icon]/[Auto Power Off]/ [Auto Review]; [Reset]/[Usb Mode]/[Video Out] - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Using the [SETUP] menu
For details about the setting procedure in the [SETUP] menu. (→32)
Item
[FOCUS ICON]
/
Change the focus icon.
[OFF]/[2 MIN.]/[5 MIN.]/[10 MIN.]
[AUTO POWER OFF]
The camera turns off
• Not used in the following situations.
automatically after a
When an AC adaptor (optional) is used, when connected
specified period of
to a computer or printer, during motion picture recording
inactivity.
or playback, and during Slide Shows or demos
• Specific periods apply in the following situations.
[INTELLIGENT AUTO] Mode: [5 MIN.], and when a Slide
Show is paused: [10 MIN.]
[OFF]: No auto review
[AUTO REVIEW]
[1 SEC.]/[2 SEC.]: Automatically display for 1 or 2
Automatically display
still pictures immediately
after taking them.
[HOLD]: Auto review screen remains until a button (other
• Fixed to [2 SEC.] in [INTELLIGENT AUTO] Mode.
• Auto review occurs immediately after still pictures taken
in [BURST] mode and in the Scene Modes [SELF
PORTRAIT], [HI-SPEED BURST], [FLASH BURST], and
[PHOTO FRAME], regardless of settings.
• Motion pictures cannot be automatically reviewed.
38
VQT2X62
(Continued)
Settings, Notes
/ / / /
seconds.
than the [DISPLAY] button) is pressed
For details about the setting procedure in the [SETUP] menu. (→32)
Item
[RESET REC. SETTINGS?]
[RESET]
[YES]/[NO]
Reset to the default
settings.
[RESET SETUP PARAMETERS?]
[YES]/[NO]
• Resetting the setup parameters will also reset the
following:
- Age in years/months and names in Scene Modes
[BABY] and [PET]
- [TRAVEL DATE]
- [WORLD TIME]
- [FAVORITE] in [PLAYBACK] menu (set to [OFF])
- [ROTATE DISP.] (set to [ON])
• Folder numbers and clock settings will not be reset.
• Camera movement may be audible as the lens function
is reset. This is not a fault.
[SELECT ON CONNECTION]:
[USB MODE]
Select [PC] or [PictBridge (PTP)] each time you connect to
Select communication
a computer or PictBridge-compatible printer
method for when
[PictBridge (PTP)]: Select when connecting to a
connecting camera to a
computer or printer with
USB connection cable.
[PC]: Select when connecting to a computer
[NTSC]/[PAL]
[VIDEO OUT]
• Operates when AV cable is connected.
Change the video output
format when connected
to a TV, etc. (Playback
Mode only).
Settings, Notes
PictBridge-compatible printer
39
VQT2X62