[Sensitivity]; [White Balance] - Panasonic Lumix DMC-FT10 Operating Instructions Manual

Using the [REC] menu
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■
Mode:
■
Settings: [ ] (Intelligent ISO) / [80] / [100] / [200] / [400] / [800] / [1600]
Setting guide

[SENSITIVITY]

Location Bright
(recommended) (outdoors)
Shutter speed Slow
Interference
●
[ ] is automatically set in a range up to 1600 based on subject movement and
brightness.
●
Scope of flash recording (→55)
●
If interference becomes noticeable, we recommend reducing the setting, or selecting
[NATURAL] in the [COLOR MODE].
74
VQT2X62
(Continued)
[SENSITIVITY]
[80] [1600]
Dark
Fast
Low High
For details about the setting procedure in the [REC] menu (→32)

[WHITE BALANCE]

Adjust colouring to suit light source if colours otherwise appear unnatural.
■
Mode:
■
Settings: [AWB] (automatic) / (outdoor, clear sky) /
(outdoor, shade) /
) / (set manually)
[AWB] operational range:
10000K
Blue sky
9000K
8000K
Cloudy sky (rain)
7000K
Shade
6000K
Sunlight
5000K
White fluorescent lighting
4000K
3000K
Incandescent lighting
2000K
Sunset/sunrise
Candlelight
1000K
K=Kelvin colour Temperature
■
Setting White Balance manually (
Select and press [MENU/SET].
Point the camera towards a white object (e.g. paper)
and press [MENU/SET].
Press [MENU/SET].
• White Balance is set to .
• The White Balance you set is retained even after
the power is turned off.
• White Balance setting may not be possible if the
subject is too bright or too dark. In such cases,
adjust the subject to an appropriate brightness, and
then set the White Balance again.
(outdoor, cloudy sky) /
(incandescent lighting) / (uses value set in
●
Picture may appear red or blue if out of
range. This function may also not work
correctly even within range if there are many
light sources present.
●
We recommend setting to [AWB] or [
when under fluorescent lighting.
)
Only takes picture of white
objects within frame (step
VQT2X62
]
)
75