Dual Page Copy - Sharp TINSE2026QSZZ Operation Manual

CONVENIENT COPY FUNCTIONS

DUAL PAGE COPY

The dual page copy function produces separate copies of two adjoining pages on the document glass. It is
especially useful when copying books and other bound documents.
[Example] Copying the right and left pages of a book
Book original
1
Touch the [DUAL PAGE COPY] key in
the special modes screen.
1/2
DUAL PAGE
COPY
MULTI SHOT
2
Touch the [OK] key in the special
modes screen.
0
OK
1/2
DUAL PAGE
COPY
3
Place the originals on the document
glass. (p.23)
Index
8 1 / x11
2
Center line of
original
44
Dual page copy
The [DUAL PAGE
COPY] key is highlighted
to indicate that the
function is enabled, and
the dual page copy icon
( ) will appear in the
screen.
You will return to the
main screen of copy
mode.
This page
is copied
first.
• A reduction setting can be selected when using
the dual page copy function, however, an
enlargement setting cannot be selected.
• The dual page copy function can only be used
when copying from the document glass. The
RSPF cannot be used.
• Only 8-1/2" x 11" paper can be used.
When copying book originals:
When copying a thick book, press down gently on the
book to flatten it against the document glass.
4
Make sure that 8-1/2" x 11" size paper
is selected.
AUTO 8½x11
PAPER SELECT
100%
COPY RATIO
5
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
LOGOUT
UT
• To cancel the dual page copy function,
Note
touch the [DUAL PAGE COPY] key in the
special modes screen. (The key will no
longer be highlighted.) (See the screen of
step 1.)
• To erase shadows caused by the document
binding, use the edge erase function (p.43).
(Center Erase and Edge + Center Erase
cannot be used with the dual page copy
function.)
If 8-1/2" x 11" size paper
is not selected, touch the
[PAPER SELECT] key to
select 8-1/2" x 11" paper.
).