Programming Device Codes; Device Types And Code Groups - Medion Remote Control Manual

Univ-FB_MD 81302_UK.fm Seite 13 Montag, 7. August 2006 11:08 11

Programming device codes

For every device that you would like to operate using the
universal remote control, you must program a four-digit
device code to a mode key (TV, VCR, DVD, CD, ASAT, CBL,
AUX, DSAT). The names on the keys are only for reminder
purposes. With the exception of the TV key you can assign
any key to any device ("Flex Mode").
The TV mode key can only be assigned to TV device
codes.
Your universal remote control is pre-programmed with
proprietary codes from Tevion devices and its most
important functions can be used with proprietary Tevion
devices without requiring any extra programming.

Device types and code groups

You can choose between the following device types when
programming in codes:
TV:
TV set, projector, plasma screen, LCD;
VCR:
Video recorder;
LD:
Laser disc player;
DVD:
DVD player;
DVR:
Digital video recorder;
HDD:
Hard disk drive;
SAT:
Satellite receivers (analogue, digital);
CABLE:
Cable box, Pay TV decoder;
DVBT:
DVB-T receivers;
STB:
Set top box;
AUDIO:
Audio device;
AMP:
Amplifier;
RECR:
Receiver (combined radio and amplifier);
HTIB:
Home Cinema;
MP3:
MP3 player;
CD:
CD player;
TAPE:
Cassette players;
TUNER:
Radio;
PHONO: Record player.
Assigment to code groups
Each type of device is assigned to a group of device codes.
When you select a device type, the appropriate code group
is searched to find a device code. Device types are assigned
as follows:
Device type
TV
VCR, LD, DVD, DVR, HDD, HTIB
SAT, CABLE, DVB-T, STB,
AUDIO, AMP, RECR, MP3, CD, TAPE,
TUNER, PHONO, HTIB (some)
Code group
TV
VCR/DVD
CBL/SAT
CD/AUDIO
13