Problems with Application Software
If you have problems with application software, do the following:
Verify that the software is properly configured for the system. See the software installation
and operation documentation for instructions on setting up and using the software.
Try a different copy of the software to see if the problem is with the copy you are using.
Make sure all cables are installed correctly.
Verify that the server board jumpers are set correctly. See Chapter 5.
If other software runs correctly on the system, contact your vendor about the failing
software.
If the problem persists, contact the software vendor's customer service representative for
help.
Bootable CD-ROM Is Not Detected
Check the following:
Is the BIOS set to allow the CD-ROM to be the first bootable device?
Check cable connections.
Verify CD is bootable in another known good CD-ROM drive. (Especially if the CD is a copy.)
MAXDATA PLATINUM Server Board User's Manual
85
Need help?
Do you have a question about the PLATINUM and is the answer not in the manual?