Server Menu - MAXDATA PLATINUM User Manual

Security Menu (continued)
Feature
Video Blanking
Power Switch Inhibit

Server Menu

Feature
System Management
Console Redirection
Event Log Configuration
Service Boot
Assert NMI on PERR
Assert NMI on SERR
FRB-2 Policy
BMC IRQ
After Power Failure
Temperature Sensor
POST Error Pause
Platform Event Filtering
48
Choices Description
Disabled Blank video when secure mode is activated.
Enabled A pass word is required to unlock the system.
This option only appears on the screen after a
"user" password has been entered.
Disabled
Enabled When enabled, the power switch is inoperable.
This option only appears on the screen after a
"user" password has been entered.
Choices Description
Press <Enter> Enters Submenu.
Press <Enter> Enters Submenu.
Press <Enter> Enters Submenu
Enable
Disable If enabled, server boots directly to System Management.
Disabled
Enabled If enabled, PCI bus parity error (PERR) routes to NMI.
Disabled
Enabled If enabled, PCI bus system error (SERR) routes to NMI.
Disable BSP Controls the policy of the FRB-2 timeout.
Do not Disable BSP This option determines when the Boot Strap Processor
Retry 3 Times (BSP) should be disabled if an FRB-2 error occurs.
Disabled Sets the BMC IRQ.
IRQ 5
IRQ 11
Stays Off Determines the mode of operation if a power loss occurs.
Last State
Power On
Disabled If enabled, the system will not boot if the ambient
Enabled system temperature is outside the range specified in the
Sensor Data Record (SDR).
Disabled If enabled, the system will wait for user intervention on
Enabled critical POST errors.
Disabled Enable/Disable triggers for system sensor events inside
Enabled the Baseboard Management Controller (BMC).
MAXDATA PLATINUM Server Board User's Manual