Security Menu - MAXDATA PLATINUM User Manual

Advanced Chipset Control Submenu
Feature
Wake on Ring
Wake on LAN
Wake on PME
Wake on RTC Alarm

Security Menu

Enabling the Supervisor Password field requires a password for entering BIOS Setup. The
passwords are not case sensitive.
Feature
User Password is
Administrator Password is
Set Administrative Password
Set User Password
User Access Level
Password on Boot
Secure Mode Timer
Secure Mode Hot Key
Secure Mode Boot
MAXDATA PLATINUM Server Board User's Manual
Option Description
Disabled Legacy wake only: Determines the action of the system
Enabled when the system power is off and the modem is ringing.
Disabled Legacy wake only: Determines the action of the system
Enabled when a LAN wake up event occurs.
Disabled Legacy wake only: Determines the action of the system when
Enabled a PCI Power Management Enable wake up event occurs.
Disabled Legacy wake only: Determines the action of the system when
Enabled a RTC Alarm Wake up event occurs.
Choices
Installed
Not Installed
Installed
Not Installed
Press <Enter>
Press <Enter>
Limited
No Access
View Only
Full
Disabled
Enabled
1 minute
2 minutes
5 minutes
10 minutes
20 minutes
60 minutes
120 minutes
(CTRL -ALT- ) Z
Disabled
Enabled
Description
Informational Only.
Informational Only.
When the <Enter> key is pressed, a pass
word prompt appears. Press ESC key to
abort. Once set, this can be disabled by set
ting it to a null string or by clearing password
jumper on server board.
When the <Enter> key is pressed, a pass
word prompt appears. Press ESC key to
abort. Once set, this can be disabled by set
ting it to a null string or by clearing password
jumper on server board.
Sets the User access level for various BIOS
setup functions.
If your password is set and enabled, the
system prompts you for a password before it
boots.
Period of PS/2 keyboard and/or mouse
inactivity specified for secure mode to
activate. A password is required for secure
mode to function.
This option only appears on the screen after
a "user" password has been entered.
Key assigned to invoke secure mode fea
tures cannot be enabled unless at least one
password is set. This option only appears on
the screen after a "user" password has been
entered.
System boots in secure mode.
The user must enter a password to unlock
the system. This option only appears on the
screen after a "user" password has been
entered.
continued
47