Table of Contents
Advertisement
1 Important Safety Information
Important Safety Information
Only a technically qualified person shall access, integrate, configure, and service this product.
Intended Application Uses
This product was evaluated as Information Technology Equipment (ITE), which may be
installed in offices, schools, computer rooms, and similar commercial type locations. The
suitability of this product for other Product Categories and Environments (such as medical,
industrial, alarm systems, and test equipment), other than an ITE application, may require
further evaluation.
Safety Instructions and Information
To avoid personal injury or property damage, before you begin installing the product, read,
observe, and adhere to all of the following safety instructions and information. The following
safety symbols may be used throughout this product guide, and may be marked on the
product and or its packaging.
Table 1. Safety Symbols
CAUTION
WARNING
Checking the Power Cords
WARNING
To avoid electrical shock, do not attempt to modify or use the supplied AC power cord(s), if
they are not the exact type required. If a power cord(s) supplied is not compatible with the
AC wall outlet in your region, get one that meets the following criteria:
•
The power cord must be properly rated for the AC voltage in your region.
•
The power cord plug cap must have an electrical current rating that is at least 125% of
the electrical current rating of the product.
•
The power cord plug cap that plugs into the wall socket-outlet must have a grounding-
type male plug designed for use in your region.
•
The power cord must have safety certifications for your region, and shall be marked
with the certification markings.
•
The power cord plug cap that plugs into the AC receptacle on the power supply must
be an IEC 320, sheet C13, type female connector.
•
In Europe, the power cord must be less than 4.5 meters (14.76 feet) long, and it must
be flexible <HAR> (harmonized) or VDE certified cordage to comply with the chassis'
safety certifications.
The power supply cord(s) is the main disconnect device to AC power. The socket outlet(s)
shall be near the equipment and shall be readily accessible for disconnection.
Multiple Power Cords
WARNING
To avoid electrical shock, disconnect all AC power cords before accessing inside the
system.
MAXDATA PLATINUM 7200 Server
Indicates the presence of a hazard that may cause minor personal injury or
property damage if the CAUTION is ignored.
Indicates the presence of a hazard that may result in serious injury or death if the
WARNING is ignored.
7
Advertisement
Table of Contents
