Table of Contents
Advertisement
Exiting the SSU
Exiting the SSU closes all SSU windows.
Setting Boot Device Priority
To change the boot priority of a device:
1. From the SSU Main window, choose Boot Devices.
2. In the Multiboot Options Add-in window, select a device.
3. Click the Move Up button to move it up in the list. Click the Move Down button to move
it down.
Setting Passwords and Security Options
You can set a user password and an admin password. On some systems, you must set an
admin password before you can set a user password. On other systems, the passwords are
independent. You can set the same passwords and security options by using BIOS Setup (37).
Setting the Admin Password
The Admin Password button lets you set or change the admin password used by both the
SSU and the system BIOS. This option is not available if both an admin and a user password
are set and you entered only the user password when you started the SSU. All changes to
the admin password take effect immediately.
To change or clear the administrator password:
1. From the SSU Main window, choose Security.
2. Click the Admin Password button.
3. If you are changing passwords, enter the old password.
4. Enter the new password (or leave blank to clear).
5. Confirm the password by entering it again (or leave blank to clear).
6. Click OK to save the password and return to the Security window.
Setting the User Password
The User Password button lets you set or change the user password used by both the SSU
and the system BIOS. All changes to the user password take effect immediately.
To change or clear the user password:
1. From the SSU Main window, choose Security.
2. Click the User Password button.
3. If you are changing passwords, enter the old password in the first box.
4. Enter the new password (or leave blank to clear).
5. Confirm the password by entering it again (or leave blank to clear).
6. Click OK to save the password and return to the Security window.
MAXDATA PLATINUM 7200 Server
21
Advertisement
Table of Contents
