Adding And Replacing External Storage Device; Ieee1394 Port; Connecting Ieee1394 Device - Samsung SVR-1630 Installation Manual

Hide thumbs Also See for SVR-1630:

Table of Contents

SVR-1630

10.2 Adding and Replacing External Storage Device

The SVR-1630 used IEEE1394 for the external storage device interface. It has two IEEE1394 ports, one

each on the front and rear panel. With them the

<Note>

Some IEEE1394 bays may not be recognized by the

vendor to confirm compatibility.

When using a FireWire supported external HDD, hard drive bays can be connected to a port in the front panel

or a port in the rear panel. The

use external power can be used.

<Note>

When an external HDD is connected while the SVR-1630 is running, the SVR-1630 should correctly

detect the external HDD. If it doesn't, it is recommended to try connection as follows.

1. Power off the

SVR-1630 and external HDD.

2. Connect the external HDD to the IEEE1394 port.

3. Power on the external device.

4. Power on the

SVR-1630

SVR-1630 can expand storage capacity up to 4TB.

SVR-1630 . Before purchasing, consult your local

SVR-1630 does not supply power to the hard drive bay; therefore only bays that

2004. 07. 2004 (v 1.0)

Installation and Connection

Samsung Techwin

Table of Contents