Using The Flash Modes; Auto Flash (A); Manual Flash (M) - Samsung SEF-54PZF User Manual

USING THE FLASH MODES

The SEF-54PZF has the following flash modes. Select the mode best suited for the subject.
P-TTL auto flash (P-TTL)
A pre-flash is fired before the main flash so that
the multi-segment metering sensor can measure
the subject's distance, brightness, brightness dif-
ference, backlit condition, etc. The data obtained is
incorporated to set the output of the main flash.
This mode obtains more accurate results than with
the conventional TTL mode. Refer to page 26 for
instructions on how to use this flash mode.

Auto flash (A)

The built-in flash metering sensor adjusts the flash
output automatically. Use with cameras that are
not P TTL Auto flash compatible. Refer to page 27
for instructions on how to use this flash mode.

Manual flash (M)

When the camera is set to manual exposure,
manual flash can be set to suit the subject
distance and aperture. The manual flash output
can be set to 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64.
Refer to page 29 for instructions on how to use
this flash mode.
25