Using The Sync Mode - Samsung SEF-54PZF User Manual

USING THE SYNC MODE

The SEF-54PZF has the following sync modes.
Select the mode best suited for the subject.
Leading Curtain Sync Mode
This is the most commonly used sync mode. In
this mode, the flash fires at the instant the first
shutter curtain completes its travel. You can use
this mode with the shutter speed set to the X-sync
speed or slower.
Refer to page 32 for instructions on how to use
this sync mode.
Trailing Curtain Sync Mode
In this sync mode, the flash is fired at the instant
the second curtain begins its travel. This mode will
freeze the subject with a blur appearing after the
subject under a slow shutter speed condition.
Refer to page 32 for instructions on how to use
this sync mode.
High Speed Sync Mode
This sync mode will enable flash synchronization
with shutter speeds faster than the X-sync speed.
Since there is no sync speed limitation, high-speed
sync is effective for fill-flash in daylight. Refer to
page 33 for instructions on how to use this sync
mode.
Contrast Control Sync Mode
This sync mode enables you to photograph with
multiple flash units, utilizing the difference of the
light intensity of each flash unit. The ratio of flash
light intensity between the flash unit set to this
sync mode and the other flash unit is 1:2. Refer to
page 35 for instructions on how to use this sync
mode.
31