Attaching To Camera For Control Flash - Samsung SEF-54PZF User Manual

When Attaching the SEF-54PZF to the Camera for Control Flash
Control flash only: not
used for main flash
(Preparation of Flash Unit Attached to Camera)
1
Firstly, set the wireless mode and channel of
the flash unit attached to the camera, and reg-
ister them on the camera.
① A ttach the SEF-54PZF to the hot shoe of
the camera after turning the camera off.
40
카메라 측의 플래시
Main flash
② Set the power switch of the flash unit to
(WIRELESS).
③ Press the wireless mode button (M/C/S) the
number of times required to display CON
TROL on the LCD panel.
④ Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
⑤ Press the channel button (CH) and select a
channel from 1CH to 4CH.
⑥ Slide the setting switch back up to the
(white dot).