Slave Mode Setting - Samsung SEF-54PZF User Manual

■ Slave Mode Setting

To properly control the slave flash, it is necessary
to set the slave mode settings.
2 seconds
or more
50
Procedure
1
Slide the setting switch up.
2
Press the LCD panel illumination button
(LIGHT) for 2 seconds or more. SL1 will be
displayed.
3
Press the select button (S) to select SL 1 or
SL 2.
SL1: When photographing in wireless mode
SL2: When photographing with slave flash
● The flash will not fire properly if the slave
mode was set to the wrong mode. It may
not fire at all or may fire simultaneously
with the control flash.
4
Press the LCD panel illumination button
(LIGHT) to finish setting.
● In SL 2, fluorescent lamps flicker may con
tribute to flash unit' s erroneous firing on
rare occasions.