Sef-36Pzf Flash Modes - Samsung SEF-36PZF User Manual

SEF-36PZF FLASH MODES

The SEF-36PZF has the following flash modes. Select the mode best suited for the subject.
1
P-TTL auto flash
P-TTL auto flash [P-TTL] Works with the GX
camera.
A pre-flash is fired before the main flash fires so
that the multi-segment metering sensor can
measure the subject's distance, brightness,
backlit condition, etc. The data obtained is
incorporated to set the output of the main flash.
This mode obtains more accurate results than
with the conventional TTL mode.
2
Auto flash
The built-in flash metering sensor adjusts the
flash output automatically.
Use with cameras that are not P-TTL Auto flash
compatible.
《16》
3
Manual flash [M]
Use the flash unit's Guide No. to calculate the
correct flash range and aperture. This mode
works with the all cameras
4
AF spot beam
Under low-light or low-contrast conditions, a red
AF-assist beam
autofocusing.
is emitted to enable