Table of Contents
Advertisement
Wireless High-Speed Sync Photography
(Using the SEF-54PZF in Combination with a
Built-in Flash Unit)
1
Firstly, set the wireless mode and channel of the
SEF-54PZF, and register them on the camera.
① Turn the camera off and then attach the
SEF-54PZF to the hot shoe of the camera
② Set the power switch of the flash unit to
(WIRELESS).
③ Press the wireless mode button (M/C/S) the
number of times required to display SLAVE
on the LCD panel.
44
카메라 측의 플래시
●You cannot set the flash unit to SLAVE while
the exposure metering timer is on (while
information relating to aperture etc. is dis-
played in the viewfinder).
④ Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
⑤ Press the channerl button (CH) and select
a channel from 1CH to 4CH.
⑥ Slide the setting switch back up to the (white dot).
Advertisement
Table of Contents
