Registering The Handset - Gigaset A540h Manual

Getting started
¤
Insert the batteries (for
correct +/- direction, see
diagram).
Charging the batteries
Charge the batteries fully prior to first use in the base/charging cradle.
The batteries are fully charged when the power icon disappears from the display.
a
The handset may only be placed in the designated base/charging cradle.
i
• The battery may heat up during charging. This is not dangerous.
• After a time, the charge capacity of the battery will decrease for technical reasons.
Display language
¤ ¤
q Settings
i
Menu
If you do not understand the language currently set:
L4
¤ ¤
v

Registering the handset

• Registering automatically to Gigaset base
¤
Place the handset into the base
• Registering manually
On the base:
and on the handset:
i
• Display shows Handset is registering. The connection to the base is established; this may take
some time.
• After successful registration, Handset registered is displayed.
For further information on this, please see the user guide of the base.
The telephone is now ready for use.
6
2
¤
Insert the battery cover from
the top
¤
Then press the cover until it
clicks into place
¤ ¤
q Language
OK
¤
. . . select language with q
Press and hold the registration/paging key (min. 3 secs.)
¤
Menu
¤
Handset
0000)
1
.
1
.
2
¤ ¤
. . . select language with q
OK
¤
OK (³ = selected)
¤ ¤
q Settings q Registration
¤ ¤
OK
. . . enter system PIN if necessary (default setting:
OK
OK
3
To open the battery cover:
¤
Grip the notch on the cover
and slide it
3
downwards .
4
=
4 h
+
¤
OK (³ = selected)
¤ ¤
OK Register
4
U
=