MAXDATA VISION 450T Manual page 78

Windows 98 Display Driver Installation / Update
B-2
VGA controller (graphics processor) on your notebook is
capable of DualView function. This unique display feature allows
you to work efficiently when you have access to an external CRT
monitor or RGB projector for a large audience presentation. With
DualView, you can access separate Windows applications on the
TFT display and on the CRT monitor simultaneously and
independently.
If the VGA driver and SMI Control Panel program have not already
installed on your notebook, use the following precedures to install
them first.
To install/update the driver, do the following:
1. Go to [Start > Settings > Control Panel] and double-click
the Display icon.
2. Click on the Settings tab in the Display Properties folder.
3. Click on the Advanced button on the lower right-hand
corner.
4. Click on the Adapter tab.
5. Click on the Change button.
6. The Update Device Driver Wizard (if you are using
Windows 98) should pop up.
7. Click the Next button and insert the factory CD-ROM and
point to the location which contains the VGA driver.