Using This Manual; Symbols And Conventions - MAXDATA VISION 450T Manual

Using This Manual

This User`s Manual contains general information about your notebook, hardware and
software setup information, troubleshooting, and technical specifications.

Symbols and Conventions

The following conventions and symbols are used in this manual:
n
When keys are to be pressed at the same time, a plus (+) symbol is used. For
instance, Fn+F7 means holding Fn and F7 keys at the same time.
n
The file names are printed in uppercase type. For instance, WELCOME.EXE.
n
When a series of clicking actions is needed in Windows O/S, [ ] and > symbols
are used. For instance, [Start > Settings > Control Panel > Multimedia] means
clicking the Start icon first, then the Settings, then the Control Panel, then the
Multimedia icon.
n
When you need to make a selection with the touch pad (or mouse), you will be
asked to `select` or `click` the item.
Note: Text in this format and symbol
means specific instructions,
commentary, sidelights, or any
additional information or notes that you
should be aware of.
Warning: Text is this format and
symbol means that failures to
comply with the given instructions or
information could result in damage
to your notebook or could cause
bodily harm or loss of life.
v