The Menu Of Power Management Setup - MAXDATA VISION 450T Manual

The Menu of Power Management Setup

Power management setup for configuring power management featuring.
Item
Power Switch
Type
Power
Management
Suspend
Mode
Standby Time
Out
Suspend Time
Out
Hard Disk
Time Out
Selections / Description
Sub-menu
On/Off [On/Off]: Set the power switch type to
On/Off function.
Suspend
[Suspend]: Set the power switch type to
Suspend function.
Disabled To disable or enable the system power
Enabled management function.
Disabled [Disabled]: All system will run in fully
speed.
POS (S1)
[POS (S1)]: Power On Suspend.
STD (S4)
The system will save its state to disk and
power off.
[STD (S4)]: Save To Disk. The system
will save its state to disk and power off.
Disabled Specify the period of inactivity before
1 Min, 2 Min, entering the Standby Mode.
3 Min, 4 Min,
5 Min, 10 Min
15 Min
Disabled, Specify the period of inactivity before
1 Min, 2 Min, entering the Suspend Mode.
3 Min, 4 Min,
5 Min, 10 Min
15 Min, 20
Min, 30 Min
Disabled Specify the period of inactivity before hard
1 Min, 2 Min disk spins down.
5 Min, 10 Min
15 Min
2-9