To Install The Battery Pack; Charging The Battery And Charging Time - MAXDATA VISION 450T Manual

Charging the Battery and Charging Time

Note:
Be sure to reserve
adequate time for
charging before
travelling.

To Install the Battery Pack:

1. Position the notebook rear-side up on a flat and secured
surface.
2. Sliding the latch in the releasing position and hold.
3. Carefully Insert the battery pack into the battery compart-
ment of the unit until it is even with the edge of the
notebook.
4. Release the latch to lock.
To charge the battery, while the battery pack is in the notebook,
plug the AC adapter into the notebook and an electrical outlet.
The charging time is approximately 2-3 hours when the notebook
is turned off and approximately 3-5 hours when the notebook is
turned on.
If your notebook is plug into an AC outlet, the battery will still be
trickle-charged even when the notebook is in operation. Charging
an empty battery pack in the trickle-charge mode will take about
3-5 hours to attain full charge.
When the battery is fully charged, the battery charge indicator
LED emits red light intermittently.
2
3-5