To Detach The Battery Pack; Installing And Removing The Battery Pack - MAXDATA VISION 450T Manual

Hide thumbs Also See for VISION 450T:
Table of Contents

Advertisement

Installing and Removing the Battery Pack

3-4
Carefully observe the illustration for this operation.

To Detach the Battery Pack:

1. Position the notebook rear-side up on a flat and secured
surface.
2. Locate the battery latches. Slide the locked latch toward
direcrion 1 shown by the arrow in the following figure and
hold.
3. Continue holding the latches in the releasing position,
and pull out the battery's module hard case toward
direction 2.
4. Lift the battery pack
out of the battery
compartment
as the right diagram.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vision 350m

Table of Contents