Table of Contents
Advertisement
09
Using the timer
Chapter 9
Using the timer
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
Important
• The clock must be set to the correct time
for the wake-up timer to work properly (see
Setting the clock on page 15).
1
Select the source you want played.
For example, press FM/AM to select the radio
as your source.
2
Prepare the source and set the volume.
For example, tune in the radio station you want
to wake up to. Adjust the volume as necessary.
3
Press TIMER twice, use
'Wake-Up' then press ENTER .
4
Use
to select 'Timer Edit' then press
ENTER .
5
Set the switch-on time.
Use
to set the hour, then press ENTER.
Set the minute in the same way, pressing
ENTER when you're done.
6
Set the switch-off time.
Set as above, pressing ENTER when done. The
wake-up indicator lights, and the switch-on,
switch-off times, the function (DVD/CD, etc.)
and volume are confirmed in the display.
7
Switch the system into standby mode.
The wake-up timer will not work if the system is
left on!
• You can check the timer settings in
standby by pressing TIMER twice.
Note
1 Sleep Auto will not work with Video CD/Super VCDs during PBC playback or CDs in repeat play.
28
En
Turning the wake-up timer on/off
If you have already set the wake-up timer, you
can switch it on/off by selecting Timer On or
Timer Off in step 4 above (press ENTER).
Setting the sleep timer
The sleep timer switches off the system after a
specified time so you can fall asleep without
worrying about it.
• If you set the sleep timer while either the
wake-up timer is active, the earlier switch
off time takes priority.
1
Press TIMER twice, use
'Sleep' then press ENTER .
to select
2
Use
press ENTER .
Choose between the following options:
• Auto – Switches off automatically after the
currently playing CD or Video CD has
finished.
• 90 min – Switches off after 90 minutes
• 60 min – Switches off after an hour
• 30 min – Switches off after 30 minutes
• Off – Cancels the sleep timer
3
To check how much time is left, repeat
step 1.
The remaining time is displayed momentarily.
Important
to select a switch-off time then
1
to select
Hide quick links:
Advertisement
Table of Contents
