Wma/Mp3/Jpeg Discs; Tuner - Pioneer S-HA5 Operating Instruction

12 Additional information
Problem
Picture disturbance during
playback or dark.
Noticeable difference in DVD
and CD volume.

WMA/MP3/JPEG discs

Problem
CD-ROM disc is not
recognized by the
system.
Files don't show up in
the Disc Navigator/
Photo Browser.

Tuner

Problem
Considerable noise in radio
broadcasts.
42
En
Remedy
• This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal, and when
this type of disc is played back, stripes etc., may appear on some
sections of the picture depending on the TV. This is not a
malfunction.
• Discs respond differently to particular player functions. This
may result in the screen becoming black for a brief instant or
shaking slightly when the function is executed. These problems
are largely due to differences between discs and disc content
and are not malfunctions of this player.
• DVDs and CDs use different recording methods. This is not a
malfunction.
Remedy
• Make sure that the CD-ROM was recorded using the ISO 9660 disc
format. See Disc / content format playback compatibility on page 36 for
other disc compatibility information.
• The files on the disc must be named with the correct file extension: .mp3
for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case
is OK). See Disc / content format playback compatibility on page 36 for other
disc compatibility information.
Remedy
• Connect the antenna (see Connecting the radio antennas on
page 8).
• Fully extend the FM wire antenna, position for best reception,
and secure to a wall.
• Connect an outdoor FM antenna (see Connecting external
antennas on page 8).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see
Connecting the radio antennas on page 8).
• Turn off any other equipment that may be causing the noise or
move it away from the unit.
• Place the antenna farther away from any other equipment that
may be causing the noise.
• The tuning interval is incorrect for your country or region. Try
switching the tuning interval (see Tuner step setting on page 36).