Video Cd/Super Vcd Pbc Menus; Listening To The Radio; Listening To Other Sources - Pioneer S-HA5 Operating Instruction

Getting started
Button What it does
ENTER
Selects the current menu option.
RETURN
Returns to the previously
displayed menu screen.
Numbers
Highlights a numbered menu
option (some discs only). Press
ENTER
to select.

Video CD/Super VCD PBC menus

Some Video CD/Super VCDs have menus from
which you can choose what you want to watch.
These are PBC (Playback control) menus.
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
starting playback using a number button to
select a track, rather than the
Button What it does
RETURN
Displays the PBC menu.
Numbers
Selects numbered menu options.
ENTER
Press
Displays the previous menu page
(if there is one).
Displays the next menu page (if
there is one).

Listening to the radio

The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don't have to manually
tune in every time you want to listen (see More
tuner features on page 24 for more on this).
1 Press FM/AM to switch to the tuner, then
press repeatedly to select the AM or FM band.
The display shows the band and frequency.
2 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
Note
1 See Using the front panel USB connection on page 10 for more on this.
(play) button.
to select.
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
• High-speed tuning: Press and hold TUNE
+/– until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, PC, etc.) to this system,
including one USB connection.
Connecting auxiliary components on page 9.
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
Press INPUT to select the front panel audio
input (F. Audio In), the rear panel audio input
(Line), or the front panel USB jack (USB).
3 If necessary, start playback of the source.
Tip
• If an auxiliary source is producing
unpleasant distortion from the speakers,
you can reduce the signal level (connected
to the F. Audio In or Line analog inputs) by
switching on the attenuator. See Front
Audio / Line attenuator settings on page 36
to do this.
04
1
See also
17
En