Table of Contents
Advertisement
04
Getting started
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
ACTIVE
DIALOGUE
NIGHT
P.BASS control
Each time the P.BASS button on the remote control is
pressed, the bass frequency mode will change.
Note
P.BASS control is initially to OFF.
Bass/treble control
Press the BASS/TREBLE, then press /// to adjust the
bass or treble.
Note
• The EQUALIZER and P.BASS cannot operate
simultaneously. The most recently selected of these two
functions will be the one used.
• BASS/TREBLE can operate alongside either the
EQUALIZER or P.BASS.
When one of the above two functions is
selected, the function that is not selected
will be displayed as follows.
1
When P.BASS setting (ON/OFF) is changed
• EQUALIZER : FLAT
2
When EQUALIZER setting is changed
• P.BASS : OFF
16
En
A flat and basic sound.
A powerful sound that
emphasizes low and high tones.
A sound that allows the radio or
vocals to be heard more easily.
A sound that can be enjoyed
at night even with lower volume.
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
Press STANDBY/ON to turn the power on.
1
2
Press and hold CLOCK/TIMER.
Press / to select "ONCE" or "DAILY",
3
then press ENTER.
ONCE – Works once only at a preset time.
DAILY – Works at the preset time on a preset day.
Press / to select "TIMER SET", then
4
press ENTER.
Press / to select the timer playback
5
source, then press ENTER.
• DVD/CD, DAB, FM, USB/
be selected as the playback source.
Press / to select the timer day, then
6
press ENTER.
Press / to set the hour, then press
7
ENTER.
Press / to set the minute, then press
8
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9
Adjust the volume press
press ENTER.
10 Press STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.
, AUDIO IN and LINE can
iPod
, then
VOLUME +/–
Advertisement
Table of Contents
