Job Build And Sadf Mode; Concurrent Copying - Panasonic Workio DP-1520P Operating Instructions Manual

Making Copies
Other Features

■ Job Build and SADF Mode

Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF Mode.
NOTE: Set the Copier Setting No. 12 (SADF
DEFAULT) to "OFF" position in
advance. (See page 51)
Thin paper: minimum 55 g/m
Example: To make 5 sets of sorted copies of
80 sheets of originals. (A4 size)
50
1
Originals: 50 sheets
<1st scan>
80
51
1 st and 2 nd
are combined into one job.
Originals: Remaining
30 sheets <2nd scan>

■ Concurrent Copying

The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and
Image Memory (See page 59) to be installed)
1st job
2nd job Reserve
● Job Build and SADF function cannot be combined with 2
NOTE
● Concurrent Copying function cannot be used when the Job Build and SADF function is selected
40
2
80
1
Scanned Data
5 sets of 80 sheets
sorted copies are
printed
1st job
Copy
2nd job
to "ON" position in the Copier Setting No. 12 (SADF DEFAULT). (See page 51)
1 2
For ADF
For i-ADF
Place one Original at a
time or up to 50 ∗ sheets
2
(80 g/m )
∗
30 sheets/B4, A3
1 2
For ADF
For i-ADF
Place the first 50
sheets of originals
on the ADF Tray.
1 2
For ADF
For i-ADF
or
Select desired settings
Select desired settings
Select desired settings
1 and 2 2.