Printer Settings (For Key Operator) - Panasonic Workio DP-1520P Operating Instructions Manual

Function
The following Parameter Settings require the input of the Key Operator Password:

■ Printer Settings (For Key Operator)

No.
00 PRINTER SETTINGS
01 COMPLETION TIME
02 PAGE PROTECTION
03 ERROR PAGE PRINT
04 SPOOL FUNCTION
05 TEXT PRINT
PS CONFIGURATION ∗
06
FONT LIST PRINT (PCL) ∗
07
FONT LIST PRINT (PS) ∗
08
MAILBOX DATA HOLD ∗
09
DELETE MAILBOX ∗
10
11 PRINT QUEUE DEL
APPLETALK ZONE ∗
12
∗
1 Available only when the optional Multi Page Description Language Controller Module is installed.
∗
2 Available only when the optional Printer Controller Module is installed.
∗
3 Available only when the optional Hard Disk Drive Unit is installed.
52
Modes
Prints the printer settings.
PRESS SET TO PRINT
Sets the job completion time setting.
1-999SEC
Selects whether to enable automatic
compression when the received data exceeds
the page memory capacity.
(This is accomplished by reducing resolution,
and/or deleting pixels to fit the data onto the
available page memory, then print it out.)
When the setting is in the "OFF" position, upon
exceeding the page memory capacity, the print
job is deleted and an Error message is displayed.
1:OFF / 2:ON
Selects whether to print the error page.
1:OFF / 2:ON
Selects whether to enable the spool function.
1:OFF / 2:ON
Selects whether to print the text page only.
1:OFF / 2:ON
1
Prints the PS configuration page.
PRESS SET TO PRINT
2
Prints the PCL font list.
PRESS SET TO PRINT
1
Prints the PS font list.
PRESS SET TO PRINT
3
Selects the automatic holding time frame for the 7 DAYS
mailbox data.
Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /
5 DAYS / 6 DAYS / 7 DAYS
3
Selects whether to delete All the mailbox data or
only the data Before the time frame selected in
the "09 Mailbox Data Hold" setting.
1:ALL / 2:BEFORE
Selects whether to disable the Key Operator's
Password (authorization) requirement to delete
the print queue.
1:FREE / 2:KEY OP. (Operator)
1
Inputs a AppleTalk zone name.
Function
Initial
Setting
180SEC
1:OFF
2:ON
2:ON
2:ON
2:KEY OP.