Replacing The Battery/Set The Date And Time - Panasonic Workio DP-1520P Operating Instructions Manual

Problem Solving

Replacing the Battery/Set the Date and Time

The machine has an internal battery
(Product No.: CR2032) which maintains
the date and time.
In the event the battery requires
replacement, the following message will
be displayed.
REPLACE BATTERY
U90
When setting the Date and Time, start
from step 6.
● The service life of the battery is approximately 1 year under normal use.
NOTE
70
1
Turn the Power Switch on the
Right Side of the machine to the
OFF position.
If the Hard Disk Drive Unit
(DA-HD18) is installed, see
page 13)
CAUTION
Keep button batteries and small parts out of reach of children to
prevent choking or poisoning. If a button battery is swallowed
accidentally, get medical treatment immediately.
Set the Date and Time continues steps 6 to 13.
6
10
09 KEY OPERATOR MODE
ENTER PASSWORD=_
3-digit
(See page 13)
2
Battery Holder
Remove 1 Screw.
Remove the Battery Holder.
11
KEY OPR.MODE (00-31)
ENTER NO. OR ∨ ^
or
17 DATE & TIME