Job Build And Sadf Mode; Concurrent Copying - Panasonic DP-80116P Operating Instructions Manual

Making Copies
Other Features

■ Job Build and SADF Mode

Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF Mode.
NOTE: Set the Copier Settings, Parameter No.
12 (SADF DEFAULT) to "OFF" position
in advance. (See page 59)
Thin paper: minimum 55 g/m
Example: To make 5 sets of sorted copies of
80 sheets of originals. (Letter size)
50
1
Originals: 50 sheets
<1st scan>
80
51
st nd
1 and 2
are combined into one job.
Originals: Remaining
30 sheets <2nd scan>

■ Concurrent Copying

The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and
Image Memory (See page 69) to be installed)
1st job
2nd job Reserve
● Job Build and SADF function cannot be combined with 2
NOTE
● Concurrent Copying function cannot be used when the Job Build and SADF function are set to
46
2
80
1
Scanned Data
5 sets of 80 sheets
sorted copies are
printed
1st job
Copy
2nd job
the "ON" position in the Copier Settings, Parameter No. 12 (SADF DEFAULT). (See page 59)
1
For ADF
For i-ADF
1
For ADF
For i-ADF
Place the first 50
sheets of originals
on the ADF Tray.
1
For ADF
For i-ADF
or
1 and 2
2
Select desired
settings
2
Select desired
settings
2
Select desired
settings
2.