Printer Settings - Panasonic Workio DP-1520P Operating Instructions Manual

No.
Modes
10 TONER SAVE (T/P)
11 TONER SAVE (PHOTO)
12 SADF DEFAULT

■ Printer Settings

No.
Modes
00 NUMBER OF PRINTS
01 PAPER SIZE
02 PAPER TRAY
03 PRINT DIRECTION
04 PRINT DATA
05 2-SIDED PRINT
06 BIND POSITION
07 RESOLUTION
FONT (PCL) ∗
1
08
SYMBOL TABLE (PCL) ∗
09
PITCH (PCL) ∗
10
POINT SIZE (PCL) ∗
11
LINES/PAGE (PCL) ∗
12
RETURN CHARACTER (PCL) ∗
13
14 MUTUAL A4/LETTER
MAILBOX MEMORY ∗
15
19 KEY OPERATOR MODE
∗
1 Available only when the optional Printer Controller Module is installed.
∗
2 Available only when the optional Hard Disk Drive Unit is installed.
Selects the Toner Save Level to use for the
Text/Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
Selects the Toner Save Level to use for the
Photo mode.
1:NONE / 2:LEVEL1 / 3:LEVEL2
Selects whether the Job Build and SADF Mode
is enabled.
1:OFF / 2:ON
Sets the default number of prints.
1-999
Sets the default paper size setting.
A3 / B4 / A4 / B5 / A5 / LEDGER / LEGAL /
LETTER / INVOICE / FLS1 / FLS2
Sets the default Paper Tray selection.
Auto / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-4
Sets the default print orientation setting.
1:PORTRAIT / 2:L-SCAPE
Determines the provision of the print data.
PRESS SET TO PRINT
Selects whether the 2-Sided print setting is
enabled.
1:OFF / 2:ON
Sets the default bind position.
1:LONG EDGE / 2:SHORT EDGE
Sets the default resolution setting.
1:300dpi / 2:600dpi / 3:1200dpi
Sets the default PCL font.
0-99
1
Sets the default PCL symbol table.
0-35
1
Sets the default PCL pitch.
0.44-99.99
1
Sets the default PCL point size.
4.00-999.75
1
Sets the default PCL lines/page.
5-128
1
Sets the default PCL return character.
1:CR / 2:CR+LF
Selects whether the mutual size A4/LETTER is
enabled.
1:OFF / 2:ON
2
Indicates the mailbox memory status.
PRESS SET TO SELECT
Inputs the key operator password.
ENTER PASSWORD =
Function
Function
Initial
Setting
1:NONE
1:NONE
1:OFF
Initial
Setting
1
A4
Auto
1:PORTRAIT
1:OFF
1:LONG EDGE
2:600dpi
0
11
10.00
12.00
60
1:CR
1:OFF
51