Panasonic Workio DP-1520P Operating Instructions Manual page 47

Digital imaging systems
Hide thumbs Also See for Workio DP-1520P:
Table of Contents

Advertisement

■ General Settings (For Key Operator) (Continued)
No.
Modes
08
SPECIAL TRAY 2
09
KEY/TOUCH BEEP
10
BYPASS SET BEEP
11
ORIG.SET BEEP ADF
12
PAPER OUT ROTATE
13
DEPT. COUNTER MODE
17
DATE & TIME
IP ADDRESS (DHCP) *
19
SUBNET MASK(DHCP) *
20
DEF. G/W IP(DHCP) *
21
DHCP DEFAULT ∗
22
DNS SERVER ADDR. ∗
23
24
MAC ADDRESS
NOTE
∗1 When setting other than DHCP server Network settings, Parameter No. "22 DHCP DEFAULT" should be set to "INVALID"
first, then setup Parameters No.19 to 21.
∗2 When Parameters No. 19 to 23 (except 22) and No. 23 are set, cycle the power by turning the Power Switch on the Right
Side of the machine OFF and ON.
∗3 When not connecting to LAN, the DHCP setting should be in the OFF position. When the DHCP setting is on ON, and the
machine is in the Shutdown Mode, Fax reception will not be accepted.
Selects the paper tray to use for special paper.
1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
5:TRAY-4 / 6:BYPASS
(Only available when optional TRAY-2 and 3/4
are installed. See page 59)
Selects the default key sound level.
1:OFF / 2:SOFT / 3:LOUD
Selects whether to sound a Beep when paper is 1:INVALID
set on the Sheet Bypass.
1:INVALID / 2:VALID
Selects whether to sound a Beep when paper is 2:VALID
placed on the ADF.
1:INVALID / 2:VALID
Machine will automatically rotate the image to
accommodate the orientation of the paper in another
Tray and print when the selected Tray is empty.
1:OFF / 2:ON
Monitors the copy usage of each department.
1:TOTAL COUNTER
2:DEPT. COUNTER
3:DEPT. COUNTER LIST
Sets the date and time.
(Day, Month, Year, Time)
Input the date and time with Cursor Keys and
Keypad.
*
1,
2
Displays the IP Address which was reserved by
DHCP server.
1,
*
2
Displays the Subnet Mask Address which was
reserved by DHCP server.
*
1,
2
Displays the Gateway IP Address which was
reserved by DHCP server.
3
Selects whether to enable the DHCP.
1:INVALID / 2:VALID
2
Selects whether to enable the DNS Server, and 2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID
<Sub Function>
1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
Indicates the MAC address.
Function
Initial
Setting
1:NONE
2:SOFT
1:OFF
Consult your
authorized
service provider
2:VALID
<to be continued>
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workio dp-1820pWorkio dp-1820e

Table of Contents