Panasonic Workio DP-1520P Operating Instructions Manual page 48

Function
■ General Settings (For Key Operator) (Continued)
No.
HARD DISK FORMAT ∗
25
HARD DISK ERR CHK ∗
26
27 ABBR GROUP ID
COMMUNITY NAME(1) ∗
28
COMMUNITY NAME(2) ∗
29
DEVICE NAME ∗
30
DEVICE LOCATION ∗
31
∗
NOTE 1 Available only when the optional Hard Disk Drive Unit is installed.
∗
2 When Parameters No. 28 to 31 are set, cycle the power by turning the Power Switch on the Right Side of the
machine OFF and ON.
48
Modes
1
Formats the hard disk.
PRESS SET TO START
1
Selects the provision for the hard disk error check.
PRESS SET TO START
Inputs the Group ID for the address book.
0-99
2
Selects whether to change the Community
Name(1) SNMP.
Enable read only
2
Selects whether to change the Community
Name(2) SNMP.
Enable read/write
2
Inputs the device name when required.
(For Status Monitor/EtherTalk Machine Name)
2
Inputs the device name when required.
(For Status Monitor)
Function
Initial
Setting
0
public
public