Job Build And Sadf Mode - Panasonic DP-8060 Operating Instructions Manual

■ ■ ■ ■ ■ Job Build and SADF Mode
Special originals (like thin paper, etc.) can be fed
from the ADF Tray and copied continuously using
the Job Build and SADF Mode.
If the Job Build and SADF buttons are not shown
on the Touch Panel display, the Job Build and
SADF Modes must be enabled in the copier
function settings. Please consult with the Key
Operator. (See page 80)
Example: To make 5 sets of sorted copies of
100 sheets of originals. (Letter size)
85
Originals: 85 sheets
100
86
Originals: Remaining 15 sheets
34
Downloaded From ManualsPrinter.com Manuals
Making Copies
2-Sided/Original
100
1
<1st scan>
st nd
1 and 2 Scanned Data
are combined into one job.
5 sets of 100 sheets
sorted copies are printed
<2nd scan>
Copy
1
Place one Original
at a time or up to 85
sheets (20 lb)/Letter
70 sheets (Ledger/
Legal/Invoice)
5
1
1
Place the first 85 sheets
of originals on the ADF
Tray.
5
2
Reduction/
Enlargement
only
Place the next original within 5 sec. of
last ejected copy.
If 5 sec. is passed, "Another Original?
YES or NO" message will be displayed.
Select "YES" button to continue copy
job.
2
Place the next original within 5 sec. of
last ejected copy.
(15 sheets)
If 5 sec. is passed, "Another Original?
YES or NO" message will be displayed.
Select "YES" button to continue copy
job.